Water Heaters — Tank & Tankless
Nobody thinks about their water heater until the shower goes cold. Heating & Cooling Two installs, repairs, and maintains tank and tankless water heaters across the Twin Cities metro — including after-hours emergency service when yours quits. Family-owned since 1980, licensed professionals. Call 763-428-3677.
Family-owned since 1980
Three generations of Twin Cities neighbors keeping homes and businesses comfortable.
NATE-certified technicians
Factory-trained, background-checked techs who explain the work before they start.
Bryant Factory Authorized Dealer
Top-tier equipment, factory warranties and rebates you can only get from an authorized dealer.
Choosing
Tank or tankless?
A conventional tank heater costs less up front and is a straightforward swap. A tankless unit costs more to install but delivers endless hot water, takes up a fraction of the space, and typically lasts significantly longer. Which one wins depends on your household's hot water habits, your gas line, and your venting — so we evaluate what you have, explain the cost-effective options, and let you pick. No upselling.
Warning signs
Signs your water heater is on its way out
- Water not as hot as it used to be, or runs out fast
- Rusty or discolored hot water
- Rumbling or popping sounds from the tank
- Moisture or pooling around the base
- It's past 10 years old — the typical tank lifespan
- Pilot light won't stay lit
Flushes keep tanks alive
Water heater flushes are also an add-on to our maintenance plan visits — sediment buildup is the quiet killer of tank water heaters in our hard-water metro.
Minnesota water
Hard water and cold water
Two things make water heaters work harder in the Twin Cities. First, hard water is common here. Minerals settle at the bottom of a tank as scale, which wastes energy, makes popping and rumbling noises and shortens the tank's life. In a tankless unit, scale builds inside the heat exchanger. Second, the water coming into your house is very cold in winter, so the heater has to raise the temperature more than it would in a warmer state. That matters most when sizing a tankless unit.
A water softener helps both kinds of heaters last longer. So does regular flushing. Read tank vs. tankless water heaters for Twin Cities homes.
Options
Types of water heaters we work with
- Standard gas tank: lowest upfront cost and a simple swap. Vents through a chimney.
- Power-vent gas tank: uses a fan to vent through PVC out the side of the house. A good choice when a new high-efficiency furnace leaves the water heater alone on an old chimney.
- Tankless gas: endless hot water, wall-mounted, long life. Needs the right gas line size, venting and yearly descaling.
- Indirect water heater: a tank heated by your boiler. A good fit for homes that already have a boiler.
- Electric tank: for homes without gas service.
Care
Simple ways to make it last
- Flush the tank once a year to remove sediment, or have us do it.
- Have the anode rod checked every few years. It's the part that protects the tank from rusting.
- Set the temperature to about 120°F. It's hot enough for most homes, saves energy and lowers the risk of scalding.
- Test the temperature and pressure relief valve once a year.
- Keep the area around a gas water heater clear, and never store gasoline or paint near it.
- If you're leaving home for a while, use the vacation setting on the gas valve.
Ask about water heater flushing as part of our maintenance plans.
Replacement day
What to expect on replacement day
A like-for-like tank replacement is usually done in a few hours. We shut off the gas and water, drain and remove the old tank, set the new one, connect the gas, water and venting, and check for leaks and proper draft. Most cities require a permit for water heater replacement, and code may require upgrades like an expansion tank, a drain pan or new venting. We'll tell you up front what your installation needs.
FAQ
Water heater questions, answered
Do you offer emergency water heater service?
Yes — after-hours emergency service available. A failed water heater can't wait, especially when it's leaking.
How long does a water heater last?
Tank units typically last around 10 years; tankless units significantly longer with regular maintenance.
Is tankless worth the extra cost?
For households that run out of hot water, or want space back, often yes. We'll walk through your usage and give you honest numbers both ways.
Do you handle new construction?
Yes — water heaters for new construction and remodels are part of our regular work.
What temperature should I set my water heater to?
About 120°F works for most homes. It's hot enough for everyday use, saves energy and lowers the risk of scalding.
Why does my water heater make popping noises?
Usually sediment from hard water on the bottom of the tank. Flushing can help, but loud popping in an older tank often means it's near the end of its life.
Should I replace my water heater when I replace my furnace?
Sometimes. A new high-efficiency furnace vents through PVC, which can leave the water heater alone on the old chimney. Then it may need a chimney liner or a power-vent water heater.
Ready when you are.
Free estimates and straight answers across the Twin Cities. After-hours emergency service available.
