CallFree EstimateSchedule Service

Furnace Repair in Maple Grove, MN

When your heat goes out in a Minnesota winter, you can't wait. We handle heating repair on furnaces, boilers, and heat pumps of every make and model, with same-day service usually available in Maple Grove, Plymouth, Brooklyn Park, Osseo, Champlin, and Rogers, plus after-hours emergency service overnight and on weekends. NATE-certified technicians, family-owned since 1980, BBB A+ rated. Call 763-428-3677.

Family-owned since 1980

Three generations of Twin Cities neighbors keeping homes and businesses comfortable.

NATE-certified technicians

Factory-trained, background-checked techs who explain the work before they start.

Bryant Factory Authorized Dealer

Top-tier equipment, factory warranties and rebates you can only get from an authorized dealer.

Start here

No heat? Do these three things first

  1. 1

    Check the thermostat

    Make sure it's set to HEAT and the batteries aren't dead.

  2. 2

    Check the filter

    A clogged filter can shut a furnace down on high-limit.

  3. 3

    Check the switch and breaker

    The furnace switch looks like a light switch and gets flipped by mistake more than you'd think.

Still no heat? Call us at 763-428-3677. After-hours emergency service is available.

Warning signs

Signs your furnace needs repair

  • No heat at all — the thermostat calls for heat and nothing happens.
  • The furnace runs but blows cold air through the vents.
  • Short cycling — it turns on and off every few minutes without warming the house.
  • Strange noises like banging, scraping, squealing, or rumbling.
  • Rising gas bills with no change in how you use the heat.
  • A yellow burner flame instead of a steady blue one.
  • Frequent breaker trips when the furnace starts.
  • The smell of burning or gas (if you smell gas, leave the house and call your gas utility first).
  • Carbon monoxide detector going off.

The visit

What a furnace repair visit looks like

  1. 1

    Diagnose

    A NATE-certified tech tests the system end to end and finds the actual cause, not just the symptom.

  2. 2

    Quote before work

    You see the price and your options before anyone picks up a tool. No surprises on the invoice.

  3. 3

    Repair

    Trucks are stocked with common furnace parts, so most heating repair calls are finished in one visit.

  4. 4

    Safety check

    We re-test the heat exchanger, burners, venting, and carbon monoxide levels before we leave.

Why us

Why Twin Cities homeowners call us for heating repair

  • Family-owned and operated since 1980.
  • NATE-certified technicians.
  • Bryant Factory Authorized Dealer — and we repair all brands.
  • Our own in-house sheet-metal fabrication shop.
  • BBB A+ rated.
  • 4.8★ from 453 customer reviews.

Regular heating maintenance prevents most of the repairs we get called for — see furnace tune-ups and heating maintenance. If your home is heated with hot water or steam instead of forced air, our boiler repair and installation team handles those too.

How it works

What happens when you call us

  1. 1

    Talk to a real person.

    During business hours, we always answer the phone. After we close, our call center takes your call and gets a technician headed your way.

  2. 2

    Honest diagnosis.

    Our NATE-certified techs arrive with diagnostic equipment and a stocked truck. Whenever we can, we'll show you what's wrong and go over the cost before any work starts.

  3. 3

    Fixed right.

    Most repairs are done in one visit. If your heat exchanger is cracked or the furnace is at the end of its life, we'll show you — and walk you through repair vs. replacement honestly.

Furnace Installation

Safety is the difference

A furnace repair isn't just about comfort — it's about carbon monoxide. Every repair visit, our technicians inspect the heat exchanger, burners, and safety controls, and check CO levels. That's the standard we've held since 1980.

Stop repeat breakdowns

A fall tune-up catches most winter breakdowns before they happen. Our maintenance plan includes two visits a year from a certified licensed technician, discounted trip charges and repairs, and keeps your manufacturer warranty valid — most HVAC manufacturers require annual maintenance for the warranty to hold.

Maintenance PlansFurnace Maintenance

FAQ

Furnace Repair FAQs

Why is my furnace blowing cold air?

Common causes are a thermostat set to FAN instead of AUTO, a dirty flame sensor shutting the burners down, a clogged filter tripping the high-limit switch, or a pilot/ignition failure. Check the thermostat and filter first — if the air is still cold, call us at 763-428-3677.

How much does furnace repair cost?

It depends on the part and the system — a flame sensor or igniter is at the low end, while a blower motor or control board costs more. Call our office at 763-428-3677 and we'll go over it; you'll always see the price before any work starts.

Do you offer emergency furnace repair?

Yes. After-hours emergency service is available across Maple Grove, Plymouth, Brooklyn Park, Osseo, Champlin, and Rogers. Call 763-428-3677 and we'll get a technician headed your way.

When should I replace my furnace instead of repairing it?

Most Minnesota furnaces last 15–20 years. Past 15, or when the repair costs more than a third of a new system, replacement usually makes better sense. We give you both numbers so you can choose.

Can you help with heating repair on a boiler or heat pump?

Yes. Our heating repair techs work on furnaces, boilers, ductless and cold-climate heat pumps, geothermal, and high-velocity systems.

Why does my furnace keep turning on and off?

Short cycling usually means a clogged filter, a bad flame sensor, or an oversized system. It wastes fuel and wears parts fast — worth a service call.

How long does a furnace last in Minnesota?

15–20 years with regular maintenance. If yours is past 15 and needing repairs, ask us for a repair-vs-replace comparison.

Do you repair boilers too?

Yes. We service furnaces, boilers, ductless heat pumps, geothermal, and high-velocity systems — residential and light commercial.

Is a yellow burner flame dangerous?

It can be. A yellow flame means incomplete combustion, which can produce carbon monoxide. Shut the furnace off and have it inspected.

How much does a service call cost?

It depends on the problem you are experiencing — call our office at 763-428-3677 for more information and details.

Ready when you are.

Free estimates and straight answers across the Twin Cities. After hours emergency service available.