CallFree EstimateSchedule Service

Heating Repair & Service in the Twin Cities

Furnaces, boilers, heat pumps, radiant floor heat, garage heaters and geothermal — repaired, maintained and installed to carry you through Minnesota winters. Family-owned since 1980, with after-hours emergency service across the Twin Cities.

Choosing a system

Which heating system fits your home?

Most Twin Cities homes heat with a gas furnace, but it isn't the only good answer. The right system depends on what your house already has, how it's built, and how you want it to feel in January. Here's the plain-language version of what we tell homeowners at the kitchen table.

  • Gas furnace — the most common choice in Minnesota. Heats fast, works with central AC, and costs the least to install when you already have ductwork.
  • Boiler — hot water instead of hot air. Quiet, even heat through radiators, baseboard or in-floor tubing. Common in older Minneapolis, St. Paul and inner-ring suburban homes.
  • Cold-climate heat pump — heats and cools from one outdoor unit. Usually paired with a furnace as backup for the coldest nights (a "dual-fuel" system).
  • Radiant floor heat — warm floors in basements, bathrooms, additions and garages. Usually runs off a boiler.
  • Geothermal — the most efficient option over the long run, with a higher up-front cost. Best on larger lots and new builds.
  • Garage and shop heaters — a separate vented gas unit heater keeps detached garages, pole buildings and workshops usable all winter.

Not sure which way to go? We'll look at your existing equipment, ductwork and gas service and give you two or three honest options with real prices — including "keep what you have and repair it" when that's the smart call.

Furnace replacementCold-climate heat pumpsBoilers vs. forced air

Repair or replace

When a repair still makes sense

A furnace or boiler that's under 15 years old and has been maintained is usually worth repairing. Igniters, flame sensors, pressure switches, inducer motors and control boards are normal wear parts, and replacing one doesn't mean the whole system is failing.

Replacement starts to make more sense when the repair is a big one on older equipment, when you've had several breakdowns in a couple of seasons, or when a technician finds a cracked heat exchanger. We show you what we found, explain it in plain English, and let you decide. We never pressure you to replace something that can be fixed.

  • Ask for the age of your system — it's on the data plate inside the furnace door.
  • Ask what the repair fixes and what else is likely to fail soon.
  • Compare the repair cost to the cost of replacement, not just to zero.
  • Check for utility rebates before you replace — see our rebates page.

Furnace repair or replace?How long does a furnace last?Rebates

Before winter

Five things to do before the first cold snap

  • Turn the heat on in September or early October to make sure it runs — not on the first 10-degree night.
  • Put in a fresh filter, and check it monthly through the heating season.
  • Test your carbon monoxide alarms and replace any that are past their expiration date.
  • Clear snow and ice from the white PVC intake and exhaust pipes outside a high-efficiency furnace after every storm.
  • Schedule a heating tune-up so a technician can check the flame, safeties and heat exchanger before you depend on it.

If your heat goes out in the middle of the night, call 763-428-3677 — after-hours emergency service is available across the Twin Cities metro.

Furnace tune-upFall HVAC checklistMaintenance plans

FAQ

Heating questions, answered

What is the best heating system for a Minnesota home?

For most homes with existing ductwork, a high-efficiency gas furnace is the most cost-effective choice. Homes with radiators or in-floor heat are usually best served by a modern boiler. Cold-climate heat pumps paired with a furnace are a strong option if you also want efficient cooling. We'll recommend what fits your house, not a one-size-fits-all answer.

How often should I have my heating system serviced?

Once a year, ideally in late summer or fall before you need it. Annual service catches worn parts early, includes a carbon monoxide safety check, and is required by most manufacturers to keep the warranty valid.

Do you service brands other than Bryant?

Yes. We're a Bryant Factory Authorized Dealer, but our NATE-certified technicians repair and maintain every make and model of furnace, boiler and heat pump.

Family-owned since 1980

Three generations of Twin Cities neighbors keeping homes and businesses comfortable.

NATE-certified technicians

Factory-trained, background-checked techs who explain the work before they start.

Bryant Factory Authorized Dealer

Top-tier equipment, factory warranties and rebates you can only get from an authorized dealer.

Ready when you are.

Free estimates and straight answers across the Twin Cities. After-hours emergency service available.