Smart Thermostats & Zoning Systems
The cheapest comfort upgrade in HVAC isn't new equipment — it's smarter control of the equipment you have. Heating & Cooling Two installs smart and WiFi thermostats and full zoning systems across the Twin Cities metro. Family-owned since 1980. Call 763-428-3677.
Family-owned since 1980
Three generations of Twin Cities neighbors keeping homes and businesses comfortable.
NATE-certified technicians
Factory-trained, background-checked techs who explain the work before they start.
Bryant Factory Authorized Dealer
Top-tier equipment, factory warranties and rebates you can only get from an authorized dealer.
Zoning
What zoning fixes
If your upstairs roasts while the main floor freezes, the problem usually isn't the furnace — it's that one thermostat is making decisions for the whole house. A zoning system divides your home into areas with independent temperature control, so heat and cooling go where they're actually needed. It's the fix for two-story hot-cold complaints, bonus rooms, and finished basements.
Smart control
Smart thermostat benefits
- Control from your phone, anywhere
- Schedules that match your real routine
- Usage reports that show where the money goes
- Alerts when something's wrong before it becomes a breakdown
- Works with zoning for room-by-room control
- Professional installation and setup included
Installed and configured right
We install and configure it, connect it to your WiFi, and make sure it's actually talking to your system correctly — the step DIY installs usually miss. A thermostat acting up is also a classic repair call — if yours is blank or unresponsive, start there.
Saving energy
How a thermostat saves money
The U.S. Department of Energy says you can save as much as 10 percent a year on heating and cooling by turning your thermostat back 7 to 10 degrees for 8 hours a day from its normal setting. A programmable or smart thermostat does that automatically, overnight and while you're at work, and warms the house back up before you wake or come home.
In a Minnesota winter, don't set back so far that the furnace struggles to recover on a below-zero morning, and never let an empty house drop below 55°F. Read what to set your thermostat to when you leave home in winter.
Choosing
Picking the right thermostat
- Match the thermostat to your system. Heat pumps, dual-fuel systems, boilers and two-stage or modulating furnaces need a thermostat that supports them.
- Communicating systems, like Bryant Evolution, work best with their matching control, which can show system alerts and fine-tune staging.
- Most smart thermostats need a common (C) wire for steady power. If your wiring doesn't have one, a technician can usually add it.
- Wi-Fi models can send alerts to your phone, like a low-temperature warning if the furnace stops while you're away.
- If you have a whole-home humidifier, a thermostat that controls humidity can adjust it as the outdoor temperature changes.
Zoning
How a zoning system works
A zoning system uses motorized dampers inside your ductwork and a thermostat in each zone. When one zone calls for heat or cooling, its dampers open and the others close, so air goes where it's needed. A zone control panel coordinates everything with your furnace or air handler.
- Two-story homes where the upstairs is hot in summer and the main floor is cold in winter
- Finished or walkout basements
- Bonus rooms over the garage
- Additions with long duct runs
- Homes where family members want different temperatures
Zoning works best with a two-stage or variable-speed system, because the equipment can slow down when only one zone needs air. Sometimes the right fix is duct changes or airflow balancing instead. Read hot and cold rooms: zoning and smart thermostats.
Other fixes
When it's not the thermostat
Uneven rooms aren't always a control problem. Crushed or undersized ducts, leaky return air and a single-stage furnace that shuts off before air reaches the far rooms all cause the same complaint. We check ductwork and airflow before recommending zoning, and our in-house sheet metal shop can fix duct problems directly. See custom ductwork.
FAQ
Thermostat and zoning questions, answered
Are smart thermostats worth it?
For most homes, yes — better schedules and remote control typically pay for the thermostat in energy savings, and the alerts catch problems early.
What does an HVAC zoning system cost?
It depends on your home's layout and how many zones make sense — we'll price it during a free estimate.
Can zoning be added to my existing system?
Usually, yes. Most forced-air systems can be zoned with dampers and a zone control panel.
My upstairs is always hot. Is zoning the fix?
It's the most common fix, yes — though sometimes the answer is airflow balancing or duct repair. We diagnose before we recommend.
How much can a programmable thermostat save?
The U.S. Department of Energy says turning the thermostat back 7 to 10 degrees for 8 hours a day can save as much as 10 percent a year on heating and cooling.
Do I need a C-wire for a smart thermostat?
Most smart thermostats need one for steady power. If your wiring doesn't have a C-wire, a technician can usually add one during installation.
Will any smart thermostat work with my heat pump?
Not always. Heat pumps and dual-fuel systems need a thermostat that supports them and is set up correctly, or you can end up running expensive backup heat.
Ready when you are.
Free estimates and straight answers across the Twin Cities. After-hours emergency service available.
